MOT Status
ExpiredMileage
92,621 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brakes imbalanced across an axle Axle 1 (3.7.B.5b)
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Nearside Front Seat belt anchorage prescribed area is excessively corroded floor panel (5.2.6)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded panel (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger (2.4.A.3)
Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside front brake application uneven (3.7.B.2)
Nearside front brakes release unevenly (3.7.B.4)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded panel (2.4.A.3)
Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded panel (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded cross member (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger (2.4.A.3)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Central Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake hose slightly deteriorated both (3.6.B.4d)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Obligatory mirror obscured but not seriously affecting the rear view (8.1.2a)
Nearside Rear wheel bearing has slight play (2.6.2)
Subframe mounting prescribed area is corroded but not considered excessive offside & nearside front chassis (2.4.A.3)
Subframe mounting prescribed area is corroded but not considered excessive offside & nearside front outriggers (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
rear exhaust box is deteriorated
rear exhaust rubber is missing
Offside Rear tyre worn on inner edge
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
general under body corrosion
power steering level low
Horn not working (1.6.2a)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Front wheel bearing has excessive play (2.5.A.3c)
Offside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Front wheel bearing has excessive play (2.5.A.3c)
Offside Rear fog lamp not working (1.3.2b)
Offside Registration plate lamp not working (1.1.C.1d)
Rear fog lamp switch faulty (1.3.1a)
Rear fog lamp tell tale not working (1.3.1b)
Offside Rear tyre worn on inner edge
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
general under body corrosion
power steering level low
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front tyre has cut in tread
Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
both front tyres worn on inner edge
Battery insecure (1.9.1)
Brake pedal anti-slip provision incomplete (3.3.A.1b)
Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch (6.1.B.2)
Nearside Front Suspension spring mounting prescribed area is excessively corroded near step (2.4.A.3)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member (6.1.B.2)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch (6.1.B.2)
Offside Front Suspension spring mounting prescribed area is excessively corroded near step (2.4.A.3)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member (6.1.B.2)
Offside Rear Suspension spring mounting prescribed area is excessively corroded in front axle (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded rear (2.4.A.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
both front tyres worn on inner edge
power steering bottle wet
Nearside Front Suspension component mounting prescribed area is excessively corroded cross member (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension component mounting prescribed area is excessively corroded cross member (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Tyre worn close to the legal limit on limit (4.1.E.1)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Inner Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Tow ball/hitch not fitted at time of test
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
brake pedal rubber slightly worn
front cross member badly corroded
Centre Rear Brake hose bulging under pressure (3.6.B.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front position lamp(s) has less than 50% of the light sources illuminating (1.1.A.3b)
Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Inner Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Tow ball/hitch not fitted at time of test
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
brake pedal rubber slightly worn
front cross member badly corroded
Centre Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Rear wheel bearing has slight play (2.6.2)
Offside Seat belt stitching slightly frayed (5.2.2b)
Brake pipe slightly corroded (3.6.B.2c)
Centre Rear Brake pipe slightly corroded (3.6.B.2c)
Front wheel bearing has slight play (2.5.A.3c)
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
cuts in tread of both rear tyres.nearside rear tyre cracking
nearside mirror cover slightly insecure
slight play in nearside of steering rack
Brake pipe excessively corroded (3.6.B.2c)
Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Brake pipe slightly corroded (3.6.B.2c)
Centre Rear Brake pipe slightly corroded (3.6.B.2c)
Front wheel bearing has slight play (2.5.A.3c)
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
cuts in tread of both rear tyres.nearside rear tyre cracking
nearside mirror cover slightly insecure
slight play in nearside of steering rack
Centre Brake pipe slightly corroded (3.6.B.2c)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
nearside mirror cover loose
offside rear tyre worn on inside edge
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Shock absorber detached (2.7.2b)
Offside Stop lamp not working (1.2.1b)
Centre Brake pipe slightly corroded (3.6.B.2c)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
nearside mirror cover loose
offside rear tyre worn on inside edge
Exhaust mounting missing (7.1.1b)
Exhaust system not adequately supported (7.1.1)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Headlamp aim too high (1.8)
Nearside Front wheel bearing has excessive play (2.5.A.3c)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Offside Stop lamp not working (1.2.1b)
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y917 JAE is a 2001 Peugeot Boxer in Blue with a 1,905cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2001 Peugeot Boxer models, the average MOT pass rate is 69.8% with a typical mileage of 51,398 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying Y917 JAE, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 25 years old, this Peugeot Boxer is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y917 JAE?
You can check the full history of Y917 JAE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y917 JAE registered?
Y917 JAE is a 2001 Peugeot Boxer, first registered on 30 May 2001.
Is Y917 JAE safe to buy?
The MOT history for Y917 JAE shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y917 JAE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y917 JAE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.