2001 Suzuki GS500

Front chassis has some light corrosion but not to excess

no chain guard

slight oil leak but not excessive

swingarm has some light corrosion but not to excess

Rear brake reading low ++borderline pass++

Brake pedal is positioned so that the brake cannot be readily applied exhaust impeding travel of pedal (1.1.2 (d))

Fuel pipe leaking at fuel tap (6.1.3 (b) (i))

Horn sound not in accordance with requirements (7.7 (c))

Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b))

Offside Rear Stop lamp missing (4.3.1 (a) (ii))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Brake pedal pivot excessively worn (1.1.1 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Offside Front Brake caliper slightly damaged but function not impaired (1.1.16 (a) (i))

Rear Brake linkage worn, but not excessively (1.1.15 (b))

exhaust noisy

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Steering headbearing has slight free play (2.2.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake caliper(s) securing bolt(s) loose (3.2.A1j)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear suspension component slightly corroded. (2.4.A.1a)

Wheel alignment slightly misaligned. (2.5.1)

side stand return spring worn not excessive

Headlamp aim too low (1.6)

crntre stand slightly stiff

crntre stand slightly stiff

Headlamp aim too high (1.6)

Lower Rear suspension bush excessively deteriorated (2.4.A2a(i))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Drive chain slightly loose (6.2.1d)

Front Floor brake test indicates a binding brake (3.3.C2c)

Rear Floor brake test indicates a binding brake (3.3.C2c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Horn not working (1.7.3a)

Front wheel bearings have excessive free play (2.3.5b) DANGEROUS