2001 Fiat Ducato

Central Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Central Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear reflector missing (4.8.2 (a) (ii))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front strut top bearing rough in operation

Offside Front Side repeater not working (4.4.1 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front strut top bearing rough in operation

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s)

o/s/r tyre side wall cracking

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

o/s/r tyre side wall cracking

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Brake hose excessively damaged bracket broken and insecure (1.1.12 (b) (ii))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing holed at air box (6.2.2 (d) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing at strutt mounting (6.2.2 (d) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger corroded (6.2.2 (d) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill corroded (6.2.2 (d) (i))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill split (6.2.2 (d) (i))

Offside Front Headlamp aim not tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing at strutt mounting (6.2.2 (d) (i))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill split (6.2.2 (d) (i))

Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced l.a.v. support bracket (6.1.1 (c) (i))

Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting back panel corroded (6.2.2 (d) (i))

Rear Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Brake load sensing valve stiff (1.1.17 (c) (ii))

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. applies to rear axle (1.2.1 (b) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Central Rear Brake linkage has restricted free movement brake valve linkage siezed (3.5.1k)

Nearside Front Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings poor welding repair plates coming off (6.1.B.2)

Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Outer Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill holed and corroded (6.1.B.2)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed and corroded (6.1.B.2)

Offside Front Outer Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill holed and corroded at door piller (6.1.B.2)

Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Central Front Inner Fuel pipe leaking fuel tank rubber hose leaking (7.2.3) DANGEROUS

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed and corroded (6.1.B.2) DANGEROUS

Offside Front Inner Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis leg holed and corroded battery insecure (6.1.B.2) DANGEROUS

Offside Front frontg cross member badly corroded and holed

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

oil leak

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing x2 parts (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/step (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

oil leak

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake pipe slightly corroded (3.6.B.2c)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

both rear inner sills corroded

Nearside Front Lower Brake pipe excessively corroded (3.6.B.2c)

Nearside Side repeater not working (1.4.A.2c)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake pipe slightly corroded (3.6.B.2c)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

both rear inner sills corroded

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside rear brake binding (3.7.B.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

front crossmember corroded