2001 Suzuki VL125

Rear reflector missing (4.8.2 (a) (ii))

Drive chain slightly loose (6.1.7 (c) (i))

Front Forks slightly corroded (2.2.2 (d) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Handlebar deformed (2.1.1b)

Throttle operating incorrectly (6.2.1f)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly stiff (2.2.1b)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Handlebar deformed (2.1.1b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly stiff (2.2.1b)

Drive chain slightly loose (6.2.1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Front Wheel damaged but not significantly reducing the original strength (4.2.1a)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Floor brake test indicates a binding brake (3.3.C2c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Wheel damaged but not significantly reducing the original strength (4.2.1a)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Drive chain excessively tight (6.2.1d)

Drive chain worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front Tyre worn close to the legal limit (4.1.3(ii))