2001 Honda Stream

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement front both bushes (5.3.4 (a) (i))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt both (2.1.3 (g) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides wishbone front (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement both side wishbone front (5.3.4 (a) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear fog lamp not working (1.3.2b)

Nearside Rear tyre cracking

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Nearside Rear tyre cracking

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Stop lamp not working (1.2.1b)

Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp aim too high (1.8)

Offside Side repeater not working (1.4.A.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)