2001 Subaru Impreza

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced various spots including suspension (6.1.1 (c) (i))

vehicle has been under sealed

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced various spots (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive n/s o/s inner sills have some corrosion (5.3.6 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Wheel Arch Corroded

Front Subframe mounting prescribed area is corroded but not considered excessive subframe (2.4.A.3)

Nearside Body has slight corrosion sill (6.1.B.2)

Offside Body has slight corrosion sill (6.1.B.2)

Nearside Front Brake pipe modified and seriously weakened front to rear (3.6.A.3)

Nearside Rear Brake pipe modified and seriously weakened front to rear (3.6.A.3)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front All position lamps not working (1.1.A.3b)

Offside Front Brake pipe excessively corroded front to rear (3.6.B.2c)

Offside Rear Brake pipe excessively corroded Front to rear (3.6.B.2c)

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (1.1.C.1a)

Nearside Front Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Rear fog lamp not working (1.3.2b)

Nearside Body has slight corrosion (6.1.B.2)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Wheel bolt(s) missing (4.2.A.1e)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Body has slight corrosion (6.1.B.2)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

hard to check wheel bearings wheels hard to turn

Front brake disc excessively pitted (3.5.1h)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has part of the system slightly deteriorated (7.1.1a)

hard to check wheel bearings wheels hard to turn

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake disc slightly pitted (3.5.1h)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake disc slightly pitted (3.5.1h)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Front tyres worn on edges of tread

Small heat cracks to O/S/ front brake disc