2001 Fiat Ducato

N/s/f inner wheel arch corroded.

O/s/r outer sill/valance panel behind wheel arch corroded.

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Play in steering rack inner joint(s) ()

Vehicle heavily under sealed.

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch shocker top mount (5.3.6 (a) (i))

Play in steering rack inner joint(s) ()

Exhaust has a minor leak of exhaust gases center box (6.1.2 (a))

Exhaust mounting defective (6.1.2 (a))

Nearside Front Leaf spring anchor bracket corroded but not seriously weakened front mount (5.3.1 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Leaf spring anchor bracket corroded but not seriously weakened front mount (5.3.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

both outer sills coroded

under side corrode and welding repairs

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Lower Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside lower mirror missing

reverse light not working

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced central inner sill (6.1.1 (c) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front lower mirror missing

Offside Lower Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside lower mirror missing

Nearside Front Inner Wheel Arch has corrosion outside 300mm of the prescribed area

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Wheel Arch has corrosion outside 300mm of prescribed area

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf Spring Front Hanger (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf Spring Rear shackle (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Lower anchorage point (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Leaf Spring front hanger (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Windscreen wiper not working (3.4 (a))

Nearside Front Inner wheel arch Corrosion outside 300mm of the prescribed area

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Sill Corrosion outside 300mm of the prescribed area

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Slight play In Inner track rod ball joint

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Wheel bearing has slight play Both (5.1.3 (a) (i))

Vehicle Structure has many welded body repairs and is extensively undersealed

Brake pipe excessively corroded Load Regulation Valve to REAR `T` Piece (1.1.11 (c))

Exhaust emissions likely to be affected by an exhaust leak FRONT Pipe to 1st Box, (8.2.2.1 (b))

Nearside Front Brake pipe excessively corroded Master Cylinder to BOTH Flexys (1.1.11 (c))

Offside Front Brake pipe excessively corroded Master Cylinder to BOTH Flexys (1.1.11 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Out Rigger with in 30cm of Front Sub Frame Mounting (REAR) (5.3.6 (a) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected CHASSIS RAIL with in 30cm of Front Sub Frame Mounting (FRONT) (5.3.6 (a) (ii)) DANGEROUS

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside SLIGHT PLAY in Inner Rack Pinion Ball Joint

Rear Wheel bearing has slight play BOTH (5.1.3 (a) (i))

TYRE REAR N/S (Near Side) has `Side Wall` cracking. NOT Exposing Tyre Cord structure,

VEHICLE STRUTURE has many `Welder Body Repairs` and is `Extensivly UNDERSEALED`.

Brake load sensing valve stiff (1.1.17 (c) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Play in steering rack inner joint(s) ()

Power steering pipe/hose has slight seepage (2.1.5 (a))

heavily undersealed

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger front of wheel (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of wheel (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill pan various places (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing (6.2.2 (d) (i))

Offside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre outrigger (6.2.2 (d) (i))

Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill in various places (6.2.2 (d) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Play in steering rack inner joint(s) ()

Power steering pipe/hose has slight seepage (2.1.5 (a))

Front Body has slight corrosion both strut tops (6.1.B.2)

Front Inner Body has slight corrosion both arches (6.1.B.2)

Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement both (2.4.G.2)

Play in steering rack inner joint(s) ()

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger (6.1.B.2)

Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger (6.1.B.2)

Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre sill (6.1.B.2)

Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger (6.1.B.2)

Front Body has slight corrosion both strut tops (6.1.B.2)

Front Inner Body has slight corrosion both arches (6.1.B.2)

Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement both (2.4.G.2)

Play in steering rack inner joint(s) ()

Nearside Front wheel bearing has slight play (2.5.A.3c)

n/s/r tyre perished

o/s/r tyre perished

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Brake pipe excessively corroded (3.6.B.2c)

Horn not working (1.6.2a)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Outer Front Brake pipe slightly corroded (3.6.B.2c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)