2001 Mazda 626

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp aim too high (1.8)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing (2.4.A.3)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front front brake binding (3.7.B.1)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear front brake binding (3.7.B.1)

Offside Stop lamp not working (1.2.1b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

both front chassis rails showing signs of corrosion

engine oil leak

slight brake bind from offside rear brake

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has little reserve travel (3.1.6b)

both front chassis rails showing signs of corrosion

engine oil leak

slight brake bind from offside rear brake

brake pedal rubber worn

n/s/f tyre side wall perished

o/s and n/s front chassi rails corroded

slight damage to o/s/f tyre side wall

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Battery insecure (1.9.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

rear brake application uneven (3.7.B.2)

brake pedal rubber worn

n/s/f tyre side wall perished

o/s and n/s front chassi rails corroded

slight damage to o/s/f tyre side wall

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

rear brake application uneven (3.7.B.2)

Nearside rear brake binding (3.7.B.1) DANGEROUS

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

near side tyre side wall perished

Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)

both front chassis rails showing signs of corrosion

centre and rear exhaust corroded and poor condition

nearside front lower arm front and rear bushes poor condition

nearside rear outer sill dented

nearside rear tyre sidewall perished and poor condition

offside front lower arm rear bush poor condition

slight brake bind from nearside rear

both front chassis rails showing signs of corrosion

centre and rear exhaust corroded and poor condition

nearside front lower arm front and rear bushes poor condition

nearside rear outer sill dented

nearside rear tyre sidewall perished and poor condition

offside front lower arm rear bush poor condition

slight brake bind from nearside rear

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

N/S/R outer sill damaged

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

N/S/R outer sill damaged

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear brake disc excessively pitted (3.5.1h)

Offside Rear brake disc excessively pitted (3.5.1h)