2001 Kymco Pulsar LX 125

Exhaust is leaking but is not excessively noisey (7.1.1b)

Steering headbearing has slight free play (2.2.2)

Brake back plate(s) insecure (3.2.A1j)

Headlamp insecure (1.2.3b)

Rear position lamp damaged and function impaired (1.1.1b)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Horn control not functioning. (1.7.2b)

Nearside Front Fairings so located that it is likely to impede the steering (2.1.2e)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Drive chain worn to excess (6.2.1e)

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front nsf indicator insecure

Rear Rear position lamp damaged but function not impaired red tape covered,not showing white light (1.1.1b)

battery low

exhaust has been sealed,but not leaking

no ignition cut off

Brake lever is bent but brake can still be readily applied (3.1.3c)

Clutch lever bent (6.2.1g)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

front tyre cracking

Headlamp aim beam image kick up to the offside (1.6)

Indicator tell tale not functioning (1.5.2)

Headlamp aim beam image kick up to the offside (1.6)