2001 Peugeot Boxer

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember (6.2.2 (d) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Stop lamp(s) with a multiple light source up to 1/2 not functioning high level brake light (4.3.1 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside inner and outer sills (5.3.6 (a) (i))

Oil leak, but not excessive on limit (8.4.1 (a) (i))

corrosion rear inner sills

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Offside Headlamp aim too low (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear wheel bearing has slight play (2.6.2)

Oil leak

both inner sills soft but not holed

both top strut mounts slightly noisy

n/s/r tyre perished

o/s/r tyre perished

Front registration plate deteriorated (6.3.1d)

Hazard warning tell tale not working correctly (1.4.B.1e)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too low (1.8)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)