2001 Mitsubishi Lancer

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

All front and rear steering/suspension corroding

Brake load sensing valve linkage stiff (3.6.E.3)

Brake load sensing valve stiff (3.6.E.3)

Exhaust front pipe deteriorating

Front Brake pad(s) wearing thin (3.5.1g)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Fuel filler neck and pipes corroded

Fuel pipe/s corroded

Offside front and nearside rear inner wheel ,arches slightly corroding

Offside rear tyre tread worn on inner and outer edges of tread and worn close to legal limit

Oil leak

Slight binding to offside front brake

Spare wheel corroded

Underside of vehicle corroded

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

All front and rear steering braking and suspension components corroding

Brake pipe slightly corroded (3.6.B.2c)

Corrosion appearing to both rear inner wings/wheel arches

Exhaust front pipe corroding

Front crossmember corroding

Rear axle beam corroding

Shock absorber has a slightly worn bush (2.7.4)

Suspension arm corroded but not seriously weakened (2.4.G.1)

Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Tyre worn close to the legal limit (4.1.E.1)

Various oil leaks

Vehicle underside corroding

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust corroding

Front crossmember corroding

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside rear tyre worn below 1.6mm on outer quarter edge of tread and slight flat spot

Oil leaks

Rear Brake load sensing valve stiff (3.6.E.3)

Surface corrosion to both rear inner wheel arches and both rear inner sills

coil spring corroded (2.4.C.1b)

Brake load sensing valve linkage stiff (3.6.E.3)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust corroding

Front crossmember corroding

Front driveshafts corroding

Surface corrosion to front floors,rear inner sills and chassis rails

coil spring corroded (2.4.C.1b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

coil spring corroded (2.4.C.1b)

Brake load sensing valve linkage stiff (3.6.E.3)

Brake pipe slightly corroded (3.6.B.2c)

Exhaust corroding

Front crossmember corroding

Front driveshafts corroding

Surface corrosion to front floors,rear inner sills and chassis rails

Front Brake pad(s) wearing thin (3.5.1g)

Front crossmember starting to corrode

Nearside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Offside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Spare wheel corroding

Surface corrosion to nearside rear inner wheel arch/sill closing panel

Front Brake pad(s) wearing thin (3.5.1g)

Front crossmember starting to corrode

Spare wheel corroding

Surface corrosion to nearside rear inner wheel arch/sill closing panel

Front Brake pad(s) wearing thin (3.5.1g)

front tyres on 3mm tread depth

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Emissions not tested (7.0)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Exhaust has part of the system slightly deteriorated (7.1.1a)