2001 Suzuki GSF600

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain worn but not considered excessive chain has several stiff links (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Lower Suspension ball joint worn, but not excessively (5.3.4 (a) (i))

Rear Position lamp light intensity obviously reduced one bulb not working (4.2.3 (a) (i))

oil around engine but no drips observed on floor

Drive chain worn but not considered excessive chain has several stiff links (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Lower Suspension ball joint worn, but not excessively (5.3.4 (a) (i))

Rear Position lamp light intensity obviously reduced one bulb not working (4.2.3 (a) (i))

oil around engine but no drips observed on floor

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e))

Front Tyre worn close to the legal limit (5.2.3 (e))

Motorcycle structure slightly corroded (6.1.1a)

oil cooler lines corroded

Rear wheel bearings have excessive free play (2.4.A.2c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Motorcycle structure slightly corroded (6.1.1a)

oil cooler lines corroded

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Chain guard insecure (6.2.1c)

Drive chain worn to excess (6.2.1e)

Front wheel bearings have excessive free play (2.3.5b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Rear Direction indicators not working (1.5.1c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

exhaust clamp broken ( corroded )

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear suspension bearing has excessive free play (2.4.A2a(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

oil leak from r/h engine case cover