MOT Status
ValidMileage
114,115 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Fuel Pipe/s corroded ()
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
underbody has corrosion, suspension components has general corrosion, sill covers fitted
Brake disc worn, pitted or scored, but not seriously weakened all four (1.1.14 (a) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))
Front Tyre slightly damaged/cracking or perishing nearside and offside also has a wear on the inner and outer edges (5.2.3 (d) (ii))
Front nearside and offside outer sill panel has corrosion
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Fuel Pipe/s corroded ()
nearside and offside inner sill panel has corrosion
underbody has corrosion, suspension components has general corrosion, sill covers fitted
Brake disc worn, pitted or scored, but not seriously weakened all four (1.1.14 (a) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement nearside and offside (5.3.4 (a) (i))
Front Tyre slightly damaged/cracking or perishing nearside and offside also has a wear on the inner and outer edges (5.2.3 (d) (ii))
Front nearside and offside outer sill panel has corrosion
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Fuel Pipe/s corroded ()
Windscreen washer provides insufficient washer liquid (3.5 (a))
nearside and offside inner sill panel has corrosion
underbody has corrosion, suspension components has general corrosion, sill covers fitted
Front Anti-roll bar linkage ball joint dust cover severely deteriorated nearside and offside (5.3.4 (b) (i))
engine cover and undertray fitted
front and rear suspension components have general corrosion
nearside and offside front wishbone rear bush deteriorated
nearside and offside inner sill panel corroded
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Front bumper damaged
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Front bumper damaged
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Rear Shock absorber has a light misting of oil (2.7.3)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Rear Shock absorber has a light misting of oil (2.7.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Small cut nearside front tyre Both rear tyres 3mm
WINDSCREEN DAMAGED BY WIPER BLADES/ FRONT TYRES SCRUBBING OFF ON INSIDE EDGES/ FRONT BRAKE PADS LOW.
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YA06 CCY is a 2006 Mazda 3 in Grey with a 1,598cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 69.2%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying YA06 CCY, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YA06 CCY?
You can check the full history of YA06 CCY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YA06 CCY registered?
YA06 CCY is a 2006 Mazda 3, first registered on 26 August 2006.
Is YA06 CCY safe to buy?
The MOT history for YA06 CCY shows 26 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YA06 CCY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YA06 CCY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.