2007 Ford Focus C-max

Exhaust emissions exceed manufacturer's specified limit plated limit 0.51 reading on test 1.02 (8.2.2.2 (a))

Exhaust emits clearly visible black smoke during acceleration (8.2.1.2 (g))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Engine mount worn

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing edge also worn (5.2.3 (d) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Undertray not fully secure (8.1.1 (b) (i))

Front Headlamp lens slightly defective Both sides (4.1.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Front Headlamp lens slightly defective Both sides (4.1.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front Anti-roll bar linkage ball joint has slight play Both fronts (5.3.4 (a) (i))

Front Headlamp lens slightly defective Both fronts (4.1.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

both rear tyres worn on inner edges to below legal limit

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Headlamp aim too high (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)