MOT Status
ExpiredMileage
159,021 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust noisy (8.1.1 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill corrossion (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill damaged (6.1.1 (c) (i))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Exhaust noisy (8.1.1 (a))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill corrossion (6.1.1 (c) (i))
Nearside Side repeater likely to become detached (4.4.1 (c) (ii))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill damaged (6.1.1 (c) (i))
inter cooler pipe fouling o/s drive shaft
Exhaust noisy (8.1.1 (a))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner (6.1.1 (c) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear brake hose insecure
Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity both (4.2.3 (b) (ii))
Nearside Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect left hand pattern (4.1.2 (c))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect left hand pattern (4.1.2 (c))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Road wheel fixing missing and a welded nut/bolt (5.2.1 (a) (i))
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Offside Side repeater incorrect colour (4.4.3 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Exhaust noisy (8.1.1 (a))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner (6.1.1 (c) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear brake hose insecure
Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity both (4.2.3 (b) (ii))
Nearside Front Inner tyre tread worn
Offside Rear Outer sill corroded
vehicle has been stood underside / discs corroded
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor pan (7.1.1 (a) (i))
Nearside Front Inner tyre tread worn
Offside Rear Outer sill corroded
vehicle has been stood underside / discs corroded
Nearside Rear Brake hose slightly damaged hose ferrules (1.1.12 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive anti roll bar bracket (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sub frame mounting and seat belt mounting (5.3.6 (a) (i))
Offside Rear Brake hose slightly damaged hose ferrules (1.1.12 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material rear front to rear (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive anti roll bar bracket (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sub frame mounting and seat belt mounting (5.3.6 (a) (i))
Emissions not tested due to silencer missing (8.2.2.2 (e))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Rear Exhaust fumes causing a danger to health of persons on board silencer missing (6.1.2 (b) (ii)) DANGEROUS
Nearside Rear Brake hose slightly damaged hose ferrules (1.1.12 (b) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive anti roll bar bracket (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sub frame mounting and seat belt mounting (5.3.6 (a) (i))
Offside Rear Brake hose slightly damaged hose ferrules (1.1.12 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material rear front to rear (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive anti roll bar bracket (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sub frame mounting and seat belt mounting (5.3.6 (a) (i))
Rear Shock absorber has slight corrosion to the casing both (2.7.2a)
Headlamp aim beam image obviously incorrect both (1.8.A.1b)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Rear Tyre tread depth below requirements of 1.6mm both (4.1.E.1)
Rear Shock absorber has slight corrosion to the casing both (2.7.2a)
Rear Shock absorber has slight corrosion to the casing (2.7.2a)
bonnet wont secure
cat flange rusty
Front Headlamp aim too low and too far to the left. (1.8)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Steering rack gaiter insecure (2.2.D.2d)
Offside Front coil spring broken (2.4.C.1a)
Rear Shock absorber has slight corrosion to the casing (2.7.2a)
bonnet wont secure
cat flange rusty
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Steering rack insecure (2.2.B.1a)
Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.C.1b)
Nearside Registration plate lamp not working (1.1.C.1d)
rear wiper blade split
rear wiper blade split
How Reliable is the Audi A3?
Based on 7,415,025 MOT tests across 593,922 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YA52 BHP is a 2003 Audi A3 in Silver with a 1,896cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 60%.
Across all 2003 Audi A3 models, the average MOT pass rate is 71.6% with a typical mileage of 92,659 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi A3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 173,142 recorded failures. If you're considering buying YA52 BHP, it's worth having these areas checked by a mechanic before committing.
The Audi A3 typically stays on UK roads for around 29 years. At 23 years old, this Audi A3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YA52 BHP?
You can check the full history of YA52 BHP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YA52 BHP registered?
YA52 BHP is a 2003 Audi A3, first registered on 21 February 2003.
Is YA52 BHP safe to buy?
The MOT history for YA52 BHP shows 25 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YA52 BHP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YA52 BHP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.