2003 Suzuki Jimny

Integral body structure is corroded but structural rigidity is not significantly reduced around rear body mounts (6.1.1 (c) (i))

engine covers and undertrays fitted obscuring some components

Surface corrosion at various points mainly rear

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Surface corrosion at various points mainly rear

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Suspension arm pin or bush excessively worn TRAILING ARM REAR BUSH (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn TRAILING ARM REAR BUSH (5.3.4 (a) (i))

EXCSS NOISY FROM REAR DIF

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Braking system leaking (1.1.3 (d))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body mounting (6.1.1 (c) (i))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body sill and wheel arch (6.1.1 (c) (i))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body sill and wheel arch (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced body mounting (6.1.1 (c) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Anti-roll bar attachment bracket/mounting fractured link rod bracket to axle casing (5.3.3 (b) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge 2.7mm (5.2.3 (e))

Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust system insecure (6.1.2 (a))

Front Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Hydraulic fluid leaking excessively (8.4.1 (a) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge 2.7mm (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Hydraulic brake cylinder leaking hydraulic fluid hose to caliper (1.1.16 (b) (i))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

front brake application uneven (3.7.B.2)

rear brake application uneven (3.7.B.2)

Exhaust has a minor leak of exhaust gases backbox (7.1.2)

Back box corroded.

Passenger seat(s) missing at time of test

Back box corroded.

Passenger seat(s) missing at time of test

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Back box corroded.

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Passenger seat(s) missing at time of test

Back box corroded.

Nearside front tyre wornon outside edge.

Passenger seat(s) missing at time of test

Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

front brake application uneven (3.7.B.2)

Back box corroded.

Nearside front tyre wornon outside edge.

Passenger seat(s) missing at time of test

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

pipes on front axle

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

front vacume pipes corroded