2005 BMW 116

Brake hose has slight corrosion to ferrule All rounf (1.1.12 (f) (i))

Engine noisey

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Suspension (6.2.2 (d) (i))

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Fuel tank exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Brake hose has slight corrosion to ferrule All rounf (1.1.12 (f) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Suspension (6.2.2 (d) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) ()

Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

under vehicle covers

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside rear brake fluctuating, but not excessively (3.7.B.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Offside Headlamp aim too far to the left (1.8)

Various undertrays and covers fitted not allowing full inspection of the vehicle.

Various undertrays and covers fitted not allowing full inspection of the vehicle.

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)