2007 Mazda 6

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive strut mount area (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Rear floor pan damaged

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Rear sill lip damaged

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both trailing arms (5.3.4 (a) (i))

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Rear floor pan damaged

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Rear sill lip damaged

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both trailing arms (5.3.4 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

General under body corrosion

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both trailing arms (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Offside Rear Brake hose leaking on an air braking system caliper union area (1.1.12 (c) (i))

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

General under body corrosion

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both trailing arms (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

General under body corrosion

Headlamp lens slightly defective both sides (4.1.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Rear wiper blade split

Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))

General under body corrosion

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Windscreen wiper does not clear the windscreen effectively both sides (3.4 (b) (ii))

General under body corrosion

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 27% (1.2.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

both front tyres worn on edges

Front position lamp(s) not working both sides (1.1.A.3b)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Front Tyre tread depth below requirements of 1.6mm both sides (4.1.E.1) DANGEROUS

Rear Tyre worn close to the legal limit both sides (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Side repeater missing (1.4.A.2b)

Nsr tyre outer tread spliting slightly