2004 Fiat Ducato

Brake performance not tested engine cutting out (1.2.1 (g))

Emissions not tested engine cutting out (8.2.1.2 (d))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Brake pipe excessively corroded x2 (1.1.11 (c))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner arch (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point/chassis/inner arch (5.3.6 (a) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))

Nearside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Nearside Rear Body component corroded and likely to cause injury wheel arch has sharp edges (6.2.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Brake pipe excessively corroded x2 (1.1.11 (c))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))

Offside Rear Position lamp not working (4.2.1 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm 195/70/15 (5.2.3 (e)) DANGEROUS

rear tyres have slight cracks

exhaust system deteriorated

Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front shock absorber corroded

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

some brake pipes are heavily undersealed

wing mirror outer covers damaged

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Nearside Front front brake binding (3.7.B.1)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear light lens cracked

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

outer sill corroded

Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassis outrigger (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing (2.4.A.3)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at front chassis (6.1.B.2)

Nearside Front Lower Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside rear brake fluctuating, but not excessively (3.7.B.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is fractured (2.4.A.3)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)