2008 Toyota Aygo

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Brake pipe corroded, covered in grease or other material front to rear at rear (1.1.11 (c))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Outer sill repaired using body filler

Subframe mounting prescribed area is corroded but not considered excessive rear subframe nearside mount areas (5.3.6 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive rear subframe offside mount areas heavily corroded (5.3.6 (a) (i))

Emissions unable to be completed exhaust broken (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases broken at rear (6.1.2 (a))

Nearside Front Brake pipe excessively corroded deeply pitted (1.1.11 (c))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear at rear (1.1.11 (c))

Offside Rear Outer sill repaired using body filler

Subframe mounting prescribed area is corroded but not considered excessive rear subframe nearside mount areas (5.3.6 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive rear subframe offside mount areas heavily corroded (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Brake pipe excessively corroded front to rear at rear (1.1.11 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material to rear at rear (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material to rear at rear (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material to rear at rear (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material to rear at rear (1.1.11 (c))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Anti-roll bar linkage likely to fail (5.3.3 (b) (ii)) DANGEROUS

Offside Front Anti-roll bar linkage likely to fail (5.3.3 (b) (ii)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material to rear at rear (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material to rear at rear (1.1.11 (c))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive localised corrosion to small area on outer sill, structural integrity not adversely affected (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive localised corrosion to small area on outer sill, structural integrity not adversely affected (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)