MOT Status
ExpiredMileage
106,956 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Sub-frame corroded and seriously weakened rear axle beam and all axle beam corroded (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Shock absorbers likely to become detached top mounting broken (5.3.2 (a) (ii)) DANGEROUS
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn on edge (5.2.3 (e))
front sub frame and all under car corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe slightly damaged (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Beam axle badly corroded
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe slightly damaged (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Beam axle badly corroded
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Damp Brake backing plate
Nearside Front Track rod end ball joint has excessive play and RACK END (2.1.3 (b) (i))
Offside Front Track rod end ball joint has excessive play and RACK END (2.1.3 (b) (i))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Under Trays Fitted O/s Rear Tyre Cracking (8 Yrs Old)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Under Trays Fitted O/s Rear Tyre Cracking (8 Yrs Old)
front wipers split
Offside Front Mechanical brake component has restricted free movement (3.5.1k)
How Reliable is the Mazda 2?
Based on 1,902,862 MOT tests across 147,013 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YB08 WCZ is a 2008 Mazda 2 in Blue with a 1,349cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2008 Mazda 2 models, the average MOT pass rate is 74.4% with a typical mileage of 63,213 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 2 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 18,380 recorded failures. If you're considering buying YB08 WCZ, it's worth having these areas checked by a mechanic before committing.
The Mazda 2 typically stays on UK roads for around 23 years. At 18 years old, this Mazda 2 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YB08 WCZ?
You can check the full history of YB08 WCZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YB08 WCZ registered?
YB08 WCZ is a 2008 Mazda 2, first registered on 19 June 2008.
Is YB08 WCZ safe to buy?
The MOT history for YB08 WCZ shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YB08 WCZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YB08 WCZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.