2008 Mercedes-benz Vito

Nearside Front Nail in tyre ()

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Valve stem slightly damaged (5.2.3 (j))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Valve stem slightly damaged (5.2.3 (j))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Valve stem slightly damaged (5.2.3 (j))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Nail in tyre ()

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Valve stem slightly damaged (5.2.3 (j))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Valve stem slightly damaged (5.2.3 (j))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Valve stem slightly damaged (5.2.3 (j))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Valve stem slightly damaged (5.2.3 (j))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Oil leak, but not excessive (8.4.1 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Both step mountings damaged

Central Rear Exhaust mounting defective exhaust clamps rotten (6.1.2 (a))

Nearside Front jacking point slight corrosion

diesel injector blow but no fumes in cab

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Both step mountings damaged

Central Rear Exhaust mounting defective exhaust clamps rotten (6.1.2 (a))

Central heat shield insecure

Nearside Front jacking point slight corrosion

diesel injector blow but no fumes in cab

Nearside Front tyre worn outer edge

Offside Front tyre worn inner edge

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Tyre worn close to the legal limit both rear (4.1.E.1)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp not working (1.3.2b)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake lever has little reserve travel (3.1.6b)

Offside Rear coil spring broken (2.4.C.1a)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Rear coil spring broken (2.4.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)