MOT Status
ExpiredMileage
160,881 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Upper Shock absorber has an excessively worn bush (2.7.4)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front coil spring broken (2.4.C.1a)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Tyre fouling a part of the vehicle (4.1.D.2)
Brake load sensing valve stiff (3.6.E.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Horn not working (1.6.2a)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS
advise nearside and offside rear tyres.
Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear registration plate deteriorated (6.3.1d)
Nearside Track rod end ball joint has excessive play (2.2.B.1f) DANGEROUS
Offside Track rod end ball joint has excessive play (2.2.B.1f) DANGEROUS
advise nearside and offside rear tyres.
slight play in steering rack arms
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Ball joint has slight play (2.2.B.1f)
Offside Front Ball joint has slight play (2.2.B.1f)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Ball joint has slight play (2.2.B.1f)
Offside Front Ball joint has slight play (2.2.B.1f)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front wheel bearing has slight play (2.5.A.3c)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Front Anti-roll bar linkage fractured (2.4.G.1)
Offside front brake binding (3.7.B.1)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front wheel bearing has slight play (2.5.A.3c)
slight play in steering rack arm
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
rear number plate in poor condition
slight wear in both front inner rack joints
How Reliable is the Renault Kangoo?
Based on 2,024,699 MOT tests across 145,796 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YB52 CNC is a 2003 Renault Kangoo in White with a 1,461cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2003 Renault Kangoo models, the average MOT pass rate is 65.5% with a typical mileage of 78,369 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Renault Kangoo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 86,705 recorded failures. If you're considering buying YB52 CNC, it's worth having these areas checked by a mechanic before committing.
The Renault Kangoo typically stays on UK roads for around 28 years. At 23 years old, this Renault Kangoo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YB52 CNC?
You can check the full history of YB52 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YB52 CNC registered?
YB52 CNC is a 2003 Renault Kangoo, first registered on 31 January 2003.
Is YB52 CNC safe to buy?
The MOT history for YB52 CNC shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YB52 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YB52 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.