MOT Status
ExpiredMileage
140,142 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Subframe mounting prescribed area is excessively corroded Floor. (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded Sill back. (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded Floor. (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Subframe mounting prescribed area is excessively corroded Sill back. (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
sills and underbody and chassi corrosion
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Suspension arm corroded and seriously weakened (2.4.G.1)
Offside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
sills and underbody and chassi corrosion
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Inner Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Play in steering rack inner joint(s)
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Under-trays fitted obscuring some underside components
fuel breather pipe (corrosion)
fuel tank securing strap (corrosion)
rear outer wheel arches (corrosion)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Tie bar/rod insecure (2.4.G.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Tie bar/rod insecure (2.4.G.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Inner Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Play in steering rack inner joint(s)
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Under-trays fitted obscuring some underside components
fuel breather pipe (corrosion)
fuel tank securing strap (corrosion)
rear outer wheel arches (corrosion)
Child seat fitted not allowing full inspection of adult belt
Engine covers fitted obscuring some components in the engine bay
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Play in steering rack inner joint(s)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Under-trays fitted obscuring some underside components
fuel breather pipe (corrosion)
fuel tank securing straps (corrosion)
n/s and o/s floor to sills (corrosion)
n/s and o/s rear outer wheel arches (corrosion)
o/s front brake back plate (corroded)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Outer Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Child seat fitted not allowing full inspection of adult belt
Engine covers fitted obscuring some components in the engine bay
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Play in steering rack inner joint(s)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Under-trays fitted obscuring some underside components
fuel breather pipe (corrosion)
fuel tank securing straps (corrosion)
n/s and o/s floor to sills (corrosion)
n/s and o/s rear outer wheel arches (corrosion)
o/s front brake back plate (corroded)
Engine covers fitted obscuring some components in the engine bay
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Play in steering rack inner joint(s)
Under-trays fitted obscuring some underside components
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Engine covers fitted obscuring some components in the engine bay
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Play in steering rack inner joint(s)
Under-trays fitted obscuring some underside components
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Suspension joint nearside lower dust cover split/missing
n/s rear chassis (corrosion)
o/s front chassis (corrosion)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Suspension joint nearside lower dust cover split/missing
n/s/r chassis (corrosion)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Suspension joint nearside lower dust cover split/missing
n/s/r chassis (corrosion)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Windscreen wiper blade insecure (8.2.2)
Non obligatory mirror damaged
Offside Windscreen wiper blade insecure (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Non obligatory mirror damaged
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YB53 KGE is a 2003 Mazda 6 in Grey with a 1,999cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying YB53 KGE, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YB53 KGE?
You can check the full history of YB53 KGE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YB53 KGE registered?
YB53 KGE is a 2003 Mazda 6, first registered on 5 December 2003.
Is YB53 KGE safe to buy?
The MOT history for YB53 KGE shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YB53 KGE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YB53 KGE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.