2002 Ktm Exc

DAYTIME USE ONLY.

Exhaust noisy (8.1.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Position lamp not working (4.2.1 (a))

Rear reflector missing (4.8.2 (a) (ii))

Exhaust noisy (8.1.1 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

rear caliper pad pin missing outer r-clip. pad pin not insecure, not likely to fail

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Chain guard missing

Rear Suspension pin, bush or joint worn but not resulting in excessive movement Slight play lower shock bush. (5.3.4 (a) (i))

Chain guard missing

Headlamp aim too high (4.1.2 (a))

Rear Suspension pin, bush or joint worn but not resulting in excessive movement Slight play lower shock bush. (5.3.4 (a) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Aftermarket exhaust fitted (not excessively noisy)

Bolt missing R/H for guard (Not insecure)

Brake lever pivot slightly tight (1.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Chain guard missing

Exhaust noisy (7.1.2)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Chain guard missing

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear suspension bush has slight free play (2.4.A2a(i))

no chain guard

Exhaust noisy (7.1.2)

Chain guard missing

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nail in nearside front tyre

Rear reflector on motorcycle missing (1.4.1)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Chain guard missing

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nail in nearside front tyre

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Chain guard missing

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Centre Front Headlamp insecure (1.2.3b)

Centre Front Wheel spoke excessively loose (4.2.1b)

Centre Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Centre Rear Rear reflector on motorcycle missing (1.4.1)

Centre Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Centre Rear Wheel has a slightly distorted bead rim. (4.2.2)

no high beam indicator on dash