MOT Status
ExpiredMileage
89,771 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front wheel bearing has excessive play (2.5.A.3c)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim too low (1.8)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake lever has no reserve travel (3.1.6b)
All rear chassis sections corroding
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front wheel bearing has excessive play (2.5.A.3c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front front brake binding (3.7.B.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
All rear chassis sections corroding
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both door mirrors held on with wire
full sill guards fitted not allowing a full inspection of presribed areas
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both door mirrors held on with wire
full sill guards fitted not allowing a full inspection of presribed areas
Nearside Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside and nearside sills covered with a hard plastic body moulding not allowing a full inspection of prescribed areas
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
offside rear brake disc deteriorating but not seriously weakened
sill body mouldings fitted not allowing a full inspection of prescribed areas
Headlamp aim too low (1.8)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside rear brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
rear brake application uneven (3.7.B.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside rear brake disc deteriorating but not seriously weakened
sill body mouldings fitted not allowing a full inspection of prescribed areas
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Stop lamp not working (1.2.1b)
Offside Front Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Child seat fitted not allowing full inspection of adult belt
Child seat fitted not allowing full inspection of adult belt
Child seat fitted not allowing full inspection of adult belt
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp aim too high (1.8)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
front inner brake disces starting to corrod
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YC03 PVW is a 2003 Mazda 323 in Silver with a 1,991cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 2003 Mazda 323 models, the average MOT pass rate is 72.1% with a typical mileage of 57,526 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying YC03 PVW, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 23 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YC03 PVW?
You can check the full history of YC03 PVW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YC03 PVW registered?
YC03 PVW is a 2003 Mazda 323, first registered on 31 March 2003.
Is YC03 PVW safe to buy?
The MOT history for YC03 PVW shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YC03 PVW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YC03 PVW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.