2006 Fiat Panda

Brake pipe corroded, covered in grease or other material All pipes corroded at Union ends (1.1.11 (c))

Rear Axle beam has been covered in coating paint

Rear Tyre worn close to legal limit/worn on edge Both sides edges (5.2.3 (e))

Vehicle has had offside rear sill repaired

Brake pipe corroded, covered in grease or other material All pipes corroded at Union ends (1.1.11 (c))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Rear Axle beam has been covered in coating paint

Rear Tyre worn close to legal limit/worn on edge Both sides edges (5.2.3 (e))

Vehicle has had offside rear sill repaired

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge bald on edge (5.2.3 (e))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing cracked /perished (5.2.3 (d) (ii))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair handbrake (1.2.1 (c))

Rear exhaust rusty

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Shock absorbers has an excessively worn bush both sides (5.3.2 (c))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear exhaust rusty

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm 155/80/13 (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

all 4 tyres wearing unevenly due to under inflation

rear brakes imbalanced 46% nearside underperforming

rear coil springs corroded

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

engine light on

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nail in nearside rear tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)