2006 Suzuki Swift

Front Exhaust mounting defective (6.1.2 (a))

Shock absorbers has slight external damage to the casing all corroded (5.3.2 (b))

fuel filler corroded

rear axle corroded

Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Exhaust has a major leak of exhaust gases join (6.1.2 (a))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Shock absorbers has slight external damage to the casing all corroded (5.3.2 (b))

fuel filler corroded

rear axle corroded

Exhaust has a minor leak of exhaust gases front flange area (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material greased (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material greased (1.1.11 (c))

underside of vehicle corroded

Registration plate lamp inoperative in the case of a single lamp or all lamps both reg bulbs (4.7.1 (b) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

nearside rear tyre cracked and perished

offside front strut top mount has slight play

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

nearside rear tyre cracked and perished

offside front strut top mount has slight play

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Macpherson strut mounting modified but not seriously weakened (5.3.3 (c) (i))

Nearside Front Headlamp insecure (4.1.1 (c))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Oil leaking excessively from engine oil filter (8.4.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Headlamp aim too high (4.1.2 (a))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Macpherson strut mounting modified but not seriously weakened (5.3.3 (c) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear seat belt slow to retract

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Seat belt retracting mechanism defective (5.2.5b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Rear wheel bearing rough when rotated (2.6.1)

Offside Rear seat belt slow to retract

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

eml lamp indicates a fault

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

eml lamp indicates a fault

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front position lamp(s) not working (1.1.A.3b)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Headlamp not working on dipped beam (1.7.5a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Rear Stop lamp not working (1.2.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)