2007 Mini One

Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Tyre tread depth below requirements of 1.6mm both (5.2.3 (e))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords 175/65X15 (5.2.3 (d) (i))

Nearside Front Outer Tyre has a cut but not deep enough to reach the ply or cords 175/65X15 (5.2.3 (d) (i))

Offside Rear Upper Position lamp not working (4.2.1 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Wishbone rear bushes. (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Wishbone rear bushes. (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Wishbone rear bushes. (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Wishbone rear bushes. (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Position lamp not working both front (4.2.1 (a) (ii))

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Direction indicator not working (1.4.A.2c)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

vehicle appears to be overheating

Nearside Front Outer Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Rear Direction indicators slightly discoloured (1.4.A.2f)

Nearside Rear Front position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Front Direction indicators slightly discoloured (1.4.A.2f)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

Nearside Front Outer Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Rear Direction indicators slightly discoloured (1.4.A.2f)

Nearside Rear Front position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Offside Front Direction indicators slightly discoloured (1.4.A.2f)

vehicle appears to be overheating

under body covers fitted not allowing full inspection of covered areas

Brake fluid warning lamp illuminated (3.6.G.2)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside front brake excessively fluctuating (3.7.B.3)

under body covers fitted not allowing full inspection of covered areas

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

The brake warning lamp on the dash is operating

The o/s/r brake pad sensor wire is broken

The tyre pressure indicator on the dash is operating