2007 Mazda 3

Front Anti-roll bar ball joint dust cover severely deteriorated both. (5.3.4 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both. (5.3.4 (a) (i))

Rear Coil spring corroded both. (5.3.1 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both. (6.2.2 (d) (i))

slight corrosion underneath the vehicle.

Front Anti-roll bar ball joint dust cover severely deteriorated both. (5.3.4 (b) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement both. (5.3.4 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Coil spring corroded both. (5.3.1 (b) (i))

Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both. (6.2.2 (d) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

slight corrosion underneath the vehicle.

Front Tyre tread depth below requirements of 1.6mm both. (5.2.3 (e))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Slight corrosion under car, ok at time of test.

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Headlamp aim projected beam image is obviously incorrect both sides product on lens (4.1.2 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen wiper does not clear the windscreen effectively both sides (3.4 (b) (ii))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Anti-roll bar linkage ball joint has slight play n/s & o/s (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Anti-roll bar linkage ball joint has slight play n/s & o/s (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Anti-roll bar linkage ball joint has slight play n/s & o/s (5.3.4 (a) (i))

general body corrosion

Front Suspension arm pin or bush excessively worn n/s & o/s (5.3.4 (a) (i))

Rear Anti-roll bar linkage ball joint has slight play n/s & o/s (5.3.4 (a) (i))

general body corrosion

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement n/s & o/s (2.4.G.2)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Rear Anti-roll bar linkage has slight play in a ball joint n/s & o/s (2.4.G.2)

multiple cuts o/s/f tyre

Nearside Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Nearside rear tyre outer wall starting to crack