2006 Peugeot 107

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear rear axle rusty

Nearside Front Anti-roll bar linkage insecurely attached broken (5.3.3 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Front Anti-roll bar linkage insecurely attached broken (5.3.3 (a) (i))

Offside Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear rear axle rusty

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Emissions not tested Due to broken exhaust (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii)) DANGEROUS

Nearside Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Bumper crash bar heavily corroded

Rear Shock absorbers corroded

Rear axle bushes worn

Rear Exhaust system insecure (6.1.2 (a))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear tyres 10 yrs old

Hazard warning switch faulty (1.4.B.1d)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear tyres 10 yrs old

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Brake pipe excessively corroded to rear (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nail in nearside rear tyre

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)