MOT Status
ExpiredMileage
177,777 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/chassis (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/chassis (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/chassis (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/chassis (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor & chassis (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill & chassis (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor & chassis (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill & chassis (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Offside Front Position lamp not working (4.2.1 (a))
Rear Service brake excessively fluctuating (1.2.1 (e))
Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor & chassis (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill & chassis (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor & chassis (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill & chassis (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Body has slight corrosion Underside various areas. (6.1.B.2)
Nearside Rear Nail in tyre ()
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Driver's seat insecure (6.2.A.1)
Front position lamp(s) not working both (1.1.A.3b)
Front registration plate deteriorated (6.3.1d)
Nearside Front Outer Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Body has slight corrosion Underside various areas. (6.1.B.2)
Nearside Rear Nail in tyre ()
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside rear brake application uneven (3.7.B.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Centre Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
front brake application uneven (3.7.B.2)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Under-trays fitted obscuring some underside components
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear rear brake application uneven (3.7.B.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Under-trays fitted obscuring some underside components
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Items removed from driver's view prior to test
Under-trays fitted obscuring some underside components
Under-trays fitted obscuring some underside components
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) not working (1.1.A.3b)
Under-trays fitted obscuring some underside components
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YC58 HKP is a 2008 Mazda 6 in Grey with a 1,998cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 56.3%.
Across all 2008 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 87,272 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying YC58 HKP, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 18 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YC58 HKP?
You can check the full history of YC58 HKP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YC58 HKP registered?
YC58 HKP is a 2008 Mazda 6, first registered on 20 October 2008.
Is YC58 HKP safe to buy?
The MOT history for YC58 HKP shows 16 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YC58 HKP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YC58 HKP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.