MOT Status
ExpiredMileage
118,131 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill to inner arch (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer and inner sill to chassis to inner arch (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill to inner arch (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer and inner sill to chassis to inner arch (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened nearside and offside (3.5.1i)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill to chassis (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened nearside and offside (3.5.1i)
Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened nearside and offside (3.5.1i)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill to chassis (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened nearside and offside (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill to floor (2.4.A.3)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill to floor (2.4.A.3)
Nearside Front Suspension arm has slight play in a pin/bush rear bush (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm has slight play in a pin/bush rear bush (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
Battery insecure (1.9.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Under-trays fitted obscuring some underside components
Front Brake pad(s) wearing thin (3.5.1g)
battery insecure
both rear trailing arm bushes slightly worn
os rear seat belt warning light inop (stays green)
small chips to windscreen zone A & B
trim under vehicle at os rear loose
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YC58 WYV is a 2008 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying YC58 WYV, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YC58 WYV?
You can check the full history of YC58 WYV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YC58 WYV registered?
YC58 WYV is a 2008 Mazda 3, first registered on 6 November 2008.
Is YC58 WYV safe to buy?
The MOT history for YC58 WYV shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YC58 WYV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YC58 WYV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.