2010 Suzuki Swift

Front Sub-frame corroded but not seriously weakened Undersealed (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear most (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear most (5.3.4 (a) (i))

Vehicle underside heavily coated with protective coating

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Sub-frame corroded but not seriously weakened Undersealed (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear most (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Rear most (5.3.4 (a) (i))

Offside Rear Park brake is the one with low effort.

Vehicle underside heavily coated with protective coating

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Brake disc contaminated (1.1.14 (b))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Offside Front Macpherson strut likely to fail (5.3.3 (b) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 30% offside working less (1.2.1 (b) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

parking brake lever has little reserve travel

Nearside Brake pipe excessively corroded front to rear main (1.1.11 (c))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Brake pipe excessively corroded front to rear main (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Rear Fuel Pipe/s corroded on edge ()

Brake pipe corroded, covered in grease or other material Various areas of rear pipes (1.1.11 (c))

Front suspension springs corroded. Especially offside .

Brake pipe corroded, covered in grease or other material Various areas of rear pipes (1.1.11 (c))

Front suspension springs corroded. Especially offside .

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Rear brake pipes are greased / coated.

Offside rear brake binding (3.7.B.1)

Rear brake pipes are greased / coated.