MOT Status
ValidMileage
53,765 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner wheel arch undersealed
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Front Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Central exhaust silencer box heavily corroded on outer skin.
Exhaust mounting defective one mounting bracket broken and several rubber mountings heavily perished and cracked. (6.1.2 (a))
Front Integral body structure is corroded but structural rigidity is not significantly reduced both sides inner wheel arch areas corroded. plastic plug missing on nearside and chassis leg heavy water contamination, ingress. (6.1.1 (c) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Power steering pipe/hose slightly corroded large pipe onto pinion corroded. (2.1.5 (g) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Wheel bearing has slight play all 4 wheel bearings have slight play. (5.1.3 (a) (i))
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strutt top mounting area holed and corroded. (5.3.6 (a) (i))
Central exhaust silencer box heavily corroded on outer skin.
Exhaust mounting defective one mounting bracket broken and several rubber mountings heavily perished and cracked. (6.1.2 (a))
Front Integral body structure is corroded but structural rigidity is not significantly reduced both sides inner wheel arch areas corroded. plastic plug missing on nearside and chassis leg heavy water contamination, ingress. (6.1.1 (c) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Power steering pipe/hose slightly corroded large pipe onto pinion corroded. (2.1.5 (g) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Wheel bearing has slight play all 4 wheel bearings have slight play. (5.1.3 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Upper Integral body structure is corroded but structural rigidity is not significantly reduced both sides inner wheelarch areas corroded (6.1.1 (c) (i))
Front Windscreen wiper blade defective both sides not fitted correctly , loose and are smearing windscreen (3.4 (b) (i))
Hazard warning tell-tale inoperative (4.9.1 (a) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect misted (5.3.2 (b))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing and chassis leg corroded near subframe mounting (5.3.6 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing Tyre manufactured in 2001 (5.2.3 (d) (ii))
Nearside Front washer jet blocked
Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg / inner wing corroded by subframe mounting (5.3.6 (a) (i))
Exhaust emissions exceed manufacturer's specified limit 1.78 recorded , manufacturers limit is 1.49 (8.2.2.2 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing as marked holed near to subframe mounting (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Upper Integral body structure is corroded but structural rigidity is not significantly reduced both sides inner wheelarch areas corroded (6.1.1 (c) (i))
Front Windscreen wiper blade defective both sides not fitted correctly , loose and are smearing windscreen (3.4 (b) (i))
Hazard warning tell-tale inoperative (4.9.1 (a) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect misted (5.3.2 (b))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing and chassis leg corroded near subframe mounting (5.3.6 (a) (i))
Nearside Front Tyre slightly damaged/cracking or perishing Tyre manufactured in 2001 (5.2.3 (d) (ii))
Nearside Front washer jet blocked
Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg / inner wing corroded by subframe mounting (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
rear brake application uneven (3.7.B.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both front anti roll bar link bushes deteriorated/cracked
slight corrosion both inner wings and arches
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords cracked/perished 195/70/15C (4.1.D.1a)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords cracked/perished 195/70/15C (4.1.D.1a)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Inner brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak sump nut ()
both front anti roll bar link bushes deteriorated/cracked
slight corrosion both inner wings and arches
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
rear tyres perished
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
exhaust rubber missing
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YD02 OGJ is a 2002 Peugeot Boxer in White with a 2,800cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 65.5%.
Across all 2002 Peugeot Boxer models, the average MOT pass rate is 71.5% with a typical mileage of 48,147 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying YD02 OGJ, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 24 years old, this Peugeot Boxer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YD02 OGJ?
You can check the full history of YD02 OGJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YD02 OGJ registered?
YD02 OGJ is a 2002 Peugeot Boxer, first registered on 22 April 2002.
Is YD02 OGJ safe to buy?
The MOT history for YD02 OGJ shows 29 tests with a 65.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YD02 OGJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YD02 OGJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.