MOT Status
ExpiredMileage
135,050 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Parking brake: efficiency below requirements (3.7.B.7)
Rear Tyre tread depth below requirements of 1.6mm both (4.1.E.1)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear coil spring broken (2.4.C.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside rear handbrake performance just within limits.
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside rear handbrake performance just within limits.
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Handbrake performance just within limits.
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Handbrake performance just within limits.
Nearside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Wipers smeary.
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
front brake pads on 3.0mm approx.
How Reliable is the BMW 316?
Based on 1,210,990 MOT tests across 108,989 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YD03 KXH is a 2003 BMW 316 in Silver with a 1,796cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 75%.
Across all 2003 BMW 316 models, the average MOT pass rate is 73.3% with a typical mileage of 73,348 miles. This particular vehicle has performed better than the average for its year.
The most common reason a BMW 316 fails its MOT is brake pipe excessively corroded, accounting for 71,150 recorded failures. If you're considering buying YD03 KXH, it's worth having these areas checked by a mechanic before committing.
The BMW 316 typically stays on UK roads for around 38 years. At 23 years old, this BMW 316 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YD03 KXH?
You can check the full history of YD03 KXH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YD03 KXH registered?
YD03 KXH is a 2003 BMW 316, first registered on 1 March 2003.
Is YD03 KXH safe to buy?
The MOT history for YD03 KXH shows 16 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YD03 KXH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YD03 KXH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.