2003 Land Rover Range Rover

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security central sill area (6.2.2 (d) (i))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security central sill area (6.2.2 (d) (i))

Suspension arm corroded but not seriously weakened all suspension arms (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

repairs done on front crossmember

Offside Rear rear brake binding (3.7.B.1)

Electronic stability system warning lamp missing. (3.4.1a)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Upper Brake pipe excessively corroded on suspension arm (3.6.B.2c)

Offside Rear Upper Brake pipe excessively corroded on suspension arm (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Rear rear parking brake recording little or no effort both (3.7.B.6a)

registration plate character(s) not correctly formed front and rear (6.3.4b)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both side rear bushes (2.4.G.2)

both inner and outer sills slight corrosion

front sub frame slight corrosion

slight corrosion on both inner sills and sill ends

Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both front (2.4.G.2)

Nearside Stop lamp has less than 50% of the light sources illuminating (1.2.1b)

Seat belt anchorage prescribed area is excessively corroded both outer sills (5.2.6)

Sub-frame corroded and seriously weakened both sides at front (2.4.G.1)

slight corrosion on both inner sills and sill ends

Nearside Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Lower Suspension arm has excessive play in a pin/bush rose bush (2.4.G.2)

Nearside Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)