MOT Status
ExpiredMileage
127,146 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Suspension component mounting prescribed area is corroded but not considered excessive all around (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive front & rear and sills. (5.3.6 (a) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i))
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive all around (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive front & rear (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive front & rear/offside & nearside (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
rear parking brake just met minimum effort
Subframe mounting repair covered in underseal Front to rear (5.3.6 (a) (i))
Suspension component mounting repair covered in underseal Front to rear (5.3.6 (a) (i))
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Trailing arm has slight play in a ball joint (2.4.G.2)
Nail in offside rear tyre
Nearside Rear Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nail in offside rear tyre
Nearside Rear Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Lower Body has slight corrosion (6.1.B.2)
N/S/R Tyre has slight uneven wear.
Offside Outer Front Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
rear wiper blade split
brake disc slightly pitted (3.5.1h)
brake disc slightly pitted (3.5.1h)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
brake fluid level low
o/s/f inner brake pad appears worn
slight cut in n/s/f tyre outer side wall
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
brake disc slightly pitted (3.5.1h)
brake disc slightly pitted (3.5.1h)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
brake fluid level low
o/s/f inner brake pad appears worn
slight cut in n/s/f tyre outer side wall
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YD04 HRH is a 2004 Mazda 6 in Silver with a 1,798cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2004 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 81,396 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying YD04 HRH, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 22 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YD04 HRH?
You can check the full history of YD04 HRH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YD04 HRH registered?
YD04 HRH is a 2004 Mazda 6, first registered on 5 August 2004.
Is YD04 HRH safe to buy?
The MOT history for YD04 HRH shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YD04 HRH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YD04 HRH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.