MOT Status
ExpiredMileage
126,556 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material front to rear both (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Chassis rails (6.2.2 (d) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Chassis rail (6.2.2 (d) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Crossmember corroded and holed (6.1.1 (c) (i))
Brake disc worn, pitted or scored, but not seriously weakened All 4 brake disc,s corroded (1.1.14 (a) (ii))
Brake hose has slight corrosion to ferrule Both front and both rear flexi hoses (1.1.12 (f) (i))
Foot brake sinks slowly under pressure
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Doing door corrode and hole
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Whole underside of this vehicle is corroded
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake hose slightly damaged (1.1.12 (b) (i))
Offside Front Brake hose slightly damaged (1.1.12 (b) (i))
Offside Front Tyre slightly damaged outer side wall (5.2.3 (d) (ii))
Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Nearside Front Brake hose slightly damaged (1.1.12 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake hose slightly damaged (1.1.12 (b) (i))
Offside Front Tyre slightly damaged outer side wall (5.2.3 (d) (ii))
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Nearside passenger door cannot be opened from outside the vehicle side loading door (6.2.B.1c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front brake caliper inappropriately repaired lower silder (3.5.1n) DANGEROUS
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear Drive shaft which forms part of the suspension support bearing excessively worn (2.4.G.4d)
Front brake disc excessively pitted (3.5.1h)
Nearside Rear coil spring fractured (2.4.C.1a)
Rear brake disc excessively pitted (3.5.1h)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YD06 CHG is a 2006 Mercedes-benz Vito in Black with a 2,148cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 70%.
Across all 2006 Mercedes-benz Vito models, the average MOT pass rate is 69.6% with a typical mileage of 121,092 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying YD06 CHG, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 20 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YD06 CHG?
You can check the full history of YD06 CHG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YD06 CHG registered?
YD06 CHG is a 2006 Mercedes-benz Vito, first registered on 13 April 2006.
Is YD06 CHG safe to buy?
The MOT history for YD06 CHG shows 20 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YD06 CHG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YD06 CHG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.