MOT Status
ValidMileage
115,742 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Exhaust has a minor leak of exhaust gases box (6.1.2 (a))
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both sides and outer sills (5.3.6 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both side (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output Both side (4.1.4 (b))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension component mounting repair covered in underseal Inner sills Both side (5.3.6 (a) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill X3 places (6.1.1 (c) (i))
Front Tyre tread depth below requirements of 1.6mm Both side (5.2.3 (e)) DANGEROUS
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both side (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output Both side (4.1.4 (b))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Brake cable guide defective and affecting operation (1.1.15 (d))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Front Headlamp lens slightly defective both (4.1.1 (b) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both sides, rear bushes (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Parking brake cable touching exhaust
Rear both rear outer sills excessively corroded but not integral structure
Rear rear bumper excessively corroded but not integral structure
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Emissions not tested (8.2.1.2 (d))
Front Exhaust has a major leak of exhaust gases Exhaust Manifold. (6.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Exhaust system insecure (6.1.2 (a))
both front tyres worn to 3mm
coolant leak
Central Stop lamp has light sources not illuminating, but not more than 50% high level (1.2.1b)
Coolant leak Stains on radiator
Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Rear Seat belts slow to retract
Rear crash bar corrosion
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp aim too low (1.8)
Parking brake lever defective so that it cannot be satisfactorily operated Excessive free play (3.1.3c)
Central Stop lamp has light sources not illuminating, but not more than 50% high level (1.2.1b)
Coolant leak Stains on radiator
Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Handbrake travel high
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Rear Seat belts slow to retract
Rear crash bar corrosion
Rear exhaust rubbers split/perished
lower suspension arm bushes cracked
spare tyre worn
Offside Headlamp not working on dipped beam (1.7.5a)
both rear tyres worn to 3mm+badly cracked (replacement advised)
front wiper split
lower suspension arm bushes cracked
spare tyre worn
travel in h/brake
Both rear tyres have small cracks in the tread.
Front windscreen wiper blade is smearing the screen slightly.
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Anti-roll bar linkage synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Both rear tyres have small cracks in the tread.
Front windscreen wiper blade is smearing the screen slightly.
Nearside Front Headlamp aim too high (1.8)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Anti-roll bar linkage synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Headlamp aim too high (1.8)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
o/s/front drive shaft oil seal is leaking
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Centre Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YD06 HVF is a 2006 Peugeot 107 in Blue with a 998cc petrol engine. This vehicle has been through 31 MOT tests with a personal pass rate of 64.5%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying YD06 HVF, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YD06 HVF?
You can check the full history of YD06 HVF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YD06 HVF registered?
YD06 HVF is a 2006 Peugeot 107, first registered on 24 March 2006.
Is YD06 HVF safe to buy?
The MOT history for YD06 HVF shows 31 tests with a 64.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YD06 HVF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YD06 HVF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.