2007 Peugeot 206

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under bulk head at back of brake master cylinder. (6.1.1 (c) (i))

Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged inner side wall weak (5.2.3 (d) (ii))

Steering box has seepage (2.1.1 (e) (i))

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Lower Suspension arm ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases front to centre joint and also from exhaust sleee (6.1.2 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Lower Suspension arm ball joint dust cover severely deteriorated both (5.3.4 (b) (i))

Emissions not tested (8.2.1.2 (d))

Front Exhaust has a major leak of exhaust gases joint (6.1.2 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front lower suspension arm heat shield insecure

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Exhaust system not adequately supported insecure (7.1.1)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front tyre worn on the outer edge

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside rear brake binding (3.7.B.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Headlamp not working on dipped beam (1.7.5a)

Rear Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)