2010 Seat Leon

Central Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Central Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

ADVISE FRONT AND REAR BUMPER TAPED TO JOINS

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Outer Brake pipe excessively corroded TO CALIPER (1.1.11 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

ADVISE FRONT AND REAR BUMPER TAPED TO JOINS

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Rear Exhaust system insecure (6.1.2 (a))

Nearside Front Body panel damaged and likely to cause injury NSF WING SHARP EDGE (6.2.1 (a) (i))

Nearside Front Bumper insecure (6.1.4 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Central Front Registration plate insecure but not likely to fall off (0.1 (a))

Nearside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

UNDER TRAYS FITTED OBSCURING SOME COMPONENTS

Emissions not tested DUE TO CONDITION OF EXHAUST SYSTEM (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases CENTRE SLEEVE MISSING (6.1.2 (a))

Exhaust system insecure CENTRE HANGER EXCESSIVELY CORRODED (6.1.2 (a))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Emissions not tested DUE TO CONDITION OF EXHAUST SYSTEM (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases CENTRE SLEEVE MISSING (6.1.2 (a))

Exhaust system insecure CENTRE HANGER EXCESSIVELY CORRODED (6.1.2 (a))

ENGINE COVERS // UNDER TRAYS FITTED OBSCURING SOME COMPONENTS

EXHAUST CENTRE HANGER EXCESSIVELY CORRODED

ENGINE COVERS // UNDER TRAYS FITTED OBSCURING SOME COMPONENTS

EXHAUST CENTRE HANGER EXCESSIVELY CORRODED

Nearside Front Position lamp not working LOOSE CONNECTION (4.2.1 (a))

engine and underbody covers fitted

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

engine and underbody covers fitted

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

Offside Registration plate lamp not working (1.1.C.1d)