2012 Suzuki Alto

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Front Anti-roll bar linkage pin or bush excessively worn both sides (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Nail in tyre

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Brake cable insecure (1.1.15 (c))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Nail in tyre

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material under arch (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material under arch (1.1.11 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Coil spring corroded (5.3.1 (b) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

undersealed

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Oil leak, but not excessive filter (8.4.1 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pipe slightly corroded both sides (3.6.B.2c)

Rear Brake pipe slightly corroded both sides (3.6.B.2c)

age related corrosion under the vehicle

vehicle tested under the wet condition

Nearside Front Mechanical brake component has restricted free movement binding (3.5.1k)

Offside Front Mechanical brake component has restricted free movement binding (3.5.1k)

Front Brake pipe slightly corroded both sides (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded both sides (3.6.B.2c)

age related corrosion under the vehicle

both sides front wheel bearing not checked

vehicle tested under the wet condition

Brake pipe slightly corroded both main front to rears at rears (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

faint brake bind starting osf

Offside Brake pipe slightly corroded main front to rear at rear (3.6.B.2c)

brake bind starting both front

near side front tyre low on inner and outer edge