MOT Status
ExpiredMileage
146,201 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
EML on
Exhaust mounting defective (6.1.2 (a))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bushes, both sides (5.3.4 (a) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
EML on
Exhaust mounting defective (6.1.2 (a))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bushes, both sides (5.3.4 (a) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Fuel cap/sealing device ineffective (6.1.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust system insecure fowling on cv boot offside (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Offside Rear Direction indicator slightly discoloured (4.4.3 (a))
Rear rear cross member corroded to excess
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Offside Rear Direction indicator slightly discoloured (4.4.3 (a))
Rear rear cross member corroded to excess
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting (5.3.6 (a) (i))
Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Inner arch is holed
Nearside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner door step holed, not prescribed area
Oil leak, but not excessive (8.4.1 (a) (i))
general corrosion to underside
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security n/s and o/s outer sills (6.2.2 (d) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear diff seal leaking
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear diff seal leaking
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Side repeater slightly discoloured (1.4.A.2f)
Nearside Front Tyre worn inner/outer edge
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Side repeater slightly discoloured (1.4.A.2f)
Nearside Front Tyre worn inner/outer edge
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
wheel trims fitted at time of test
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Rear fog lamp not working (1.3.2b)
Windscreen washer provides insufficient washer liquid (8.2.3)
wheel trims fitted at time of test
Engine covers fitted obscuring some components in the engine bay
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Play in steering rack inner joint(s)
Under-trays fitted obscuring some underside components
n/s side door corroding at bottom
o/s inner door panel missing
o/s side door corroding at bottom
o/s/r brake backplate corroding away
Rear Exhaust has a major leak of exhaust gases (7.1.2)
exhaust front clamp deteriorated
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear coil spring incomplete (2.4.C.1a)
Exhaust has part of the system slightly deteriorated (7.1.1a)
exhaust clamp after cat fractured
Brakes imbalanced across an axle (3.7.B.5b)
Centre Exhaust has part of the system excessively deteriorated (7.1.1a)
Parking brake lever has no reserve travel (3.1.6b)
exhaust clamp after cat fractured
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust has part of the system excessively deteriorated (7.1.1a)
Nearside Rear brake disc excessively pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
Nearside Direction indicator slightly discoloured (1.4.A.2f)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Brakes imbalanced across an axle (3.7.B.5b)
front brake application uneven (3.7.B.2)
front brakes release unevenly (3.7.B.4)
Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YD54 JEO is a 2004 Mercedes-benz Vito in Blue with a 2,148cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 56.3%.
Across all 2004 Mercedes-benz Vito models, the average MOT pass rate is 67.7% with a typical mileage of 109,326 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying YD54 JEO, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 22 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YD54 JEO?
You can check the full history of YD54 JEO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YD54 JEO registered?
YD54 JEO is a 2004 Mercedes-benz Vito, first registered on 1 September 2004.
Is YD54 JEO safe to buy?
The MOT history for YD54 JEO shows 32 tests with a 56.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YD54 JEO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YD54 JEO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.