2005 Kia Sorento

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe corroded, covered in grease or other material Both Rears (1.1.11 (c))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer Sill (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Fuel cap/sealing device missing (6.1.3 (b) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe corroded, covered in grease or other material Both Rears (1.1.11 (c))

Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer Sill (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Position lamp incorrect colour (4.2.3 (a) (i))

Offside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

general corrosion under vehicle

Brake pipe corroded, covered in grease or other material All front and rear (1.1.11 (c))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Service brake imbalanced across an axle (1.2.1 (b) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Hydraulic brake calliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) DANGEROUS

Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake slightly binding

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)