MOT Status
ValidMileage
84,236 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Horn not working (7.7 (a))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Service brake excessively binding both rear (1.2.1 (f))
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outersill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outersill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis marked with paint by suspension arm mount (5.3.6 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre innersill (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened slight corrosion (5.3.3 (b) (i))
Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Front Sub-frame corroded but not seriously weakened slight corrosion (5.3.3 (b) (i))
Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, but not excessively both (1.1.14 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Service brake grabbing severely (1.2.1 (c))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Front Brake disc worn, but not excessively both (1.1.14 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/chassis (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/chassis (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/chassis (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/chassis (5.3.6 (a) (i))
Central Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Registration plate lamp not working (1.1.C.1d)
Offside rear brake binding (3.7.B.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear shocker are started to corrod
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear shocker are started to corrod
Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Front position lamp(s) obviously incorrectly positioned (1.1.A.3a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YD56 RKE is a 2006 Peugeot 107 in Black with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying YD56 RKE, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YD56 RKE?
You can check the full history of YD56 RKE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YD56 RKE registered?
YD56 RKE is a 2006 Peugeot 107, first registered on 8 September 2006.
Is YD56 RKE safe to buy?
The MOT history for YD56 RKE shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YD56 RKE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YD56 RKE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.