2008 Toyota Aygo

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear axel corroded

Brake performance unable to be tested (1.2.1 (g))

Emissions unable to be completed (8.2.1.2 (d))

Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Parking brake inoperative on one side (1.4.1 (a))

Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear axel corroded

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))

Brake disc worn, but not excessively Both front (1.1.14 (a) (i))

Nearside Front Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Subframe, rear axle, suspension, sil's corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))

Brake disc worn, but not excessively Both front (1.1.14 (a) (i))

Nearside Front Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Subframe, rear axle, suspension, sil's corroded

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.C.1d)