2003 Ford Ranger

Suspension component mounting prescribed area is corroded but not considered excessive various underside (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Wheel bearing has slight play both sides (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive various around vehicle + body mounts (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Wheel bearing has slight play both sides (5.1.3 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive various underside + at bodymounts (5.3.6 (a) (i))

Front Outer Body mounting fixing insecure, but overall security not significantly reduced both sides corroding (6.2.2 (c) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive various underside (5.3.6 (a) (i))

Anti-lock braking system warning lamp does not illuminate (1.6 (a))

Nearside Front Headlamp insecure lower mount (4.1.1 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Rear Body mounting fixings insecure bolts x 2 (6.2.2 (c) (i))

Offside Rear Rear fog lamp missing (4.5.1 (a) (ii))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nsr + osr buck outriggers/ strengtheners/mounts as chalked (6.1.1 (c) (i))

Front Lower Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Outer Body mounting fixing insecure, but overall security not significantly reduced both sides + corrosion present (6.2.2 (c) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive various on chassis + suspension components (5.3.6 (a) (i))

Offside Rear Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

rear body mountings corroding

Front Lower panel corroded

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing in front of o/s/front wheel (5.3.6 (a) (i))

Front Registration plate inscription illegible (0.1 (b))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near front shackle (5.3.6 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Prop shaft joint excessively worn (6.1.7 (c) (i))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides x members near shackles (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive all chassis and x members (5.3.6 (a) (i))

chassis corroded

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension component pin or bush excessively worn shock (5.3.4 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Suspension arm pin or bush excessively worn shock (5.3.4 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

chassis corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear diff casing corroded

Suspension component mounting prescribed area is corroded but not considered excessive all chassis and x members (2.4.A.3)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Body has a sharp edge caused by corrosion bonet (6.1.C.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis near shackle (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis near shackle (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded x member near shackle (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Body has a sharp edge caused by corrosion tailgate (6.1.C.1)

Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Rear Brake pipe excessively corroded valve to hose (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Brake pipe slightly damaged (2.2.D.2b)

Rear diff casing corroded

Suspension component mounting prescribed area is corroded but not considered excessive all chassis and x members (2.4.A.3)

Body has slight corrosion Both sides (6.1.B.2)

Suspension spring mounting prescribed area is corroded but not considered excessive Both sides rear crossmember (2.4.A.3)

Brakes imbalanced across an axle Front (3.7.B.5b)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Body has slight corrosion Both sides (6.1.B.2)

Suspension spring mounting prescribed area is corroded but not considered excessive Both sides rear crossmember (2.4.A.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Outer Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pipe slightly corroded (3.6.B.2c)

Exhaust system not adequately supported (7.1.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pipe slightly corroded (3.6.B.2c)

Front Brake pipe slightly corroded (3.6.B.2c)

Centre Exhaust system not adequately supported (7.1.1)

Nearside Front Headlamp insecure (1.7.3)

Nearside Headlamp aim too low (1.8)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Headlamp not in a clean condition affecting beam image (1.2.4a)

Rear registration plate deteriorated (6.3.1d)

nearside rear tyre close to legel limit 2mm on centre and inner 3mm on outside edge