2003 Mercedes-benz Vito

Offside Headlamp aim too high (1.8)

Emissions not tested (7.4.B.1)

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Nearside Front Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Nearside Front Bonded suspension unit modified and seriously weakened n/s/front rear bush (2.4.A.2)

Parking brake: efficiency below requirements (3.7.B.7)

Vehicle structure has slight corrosion n/s/f/ inner arch-o/s/f/ inner arch- (6.1.B.2)

all brake pipes covered by substance unable to check properly

all under vehicle/all inner arches covered by substance unable to check properly

drivers seat torn-child seat fitted to rear unable to check seatbelt

inner and outter sills corroded-o/s/f chasis leg/jacking point corroded

n/s/f chasis leg/jacking point corroded-x2 rear shocker casings corroded and damaged

n/s/f/ mirror damaged-clutch slipping-x2 front links slight play

o/s/f brake pipe corroded-front brakes juddering-front pads worn low

rear and front pads worn low-rear and front brake discs wearing thin

rear brakes passed on limits-all 4 tyres on limit-

rear bumper damaged-heat shield insecure-exhaust and mountings corroded

under vehicle various areas corrosion

x2 front tyres on limit and edges bald-x2 rear shockers damp and weak

x2 inner cv boots deteriated

x2 rear wheel arches corroded/covered by substance unable to check properly

x2 rear wheel bearings slight play-all outter arches corroded

x2 rear wheel bearings slightly noisy and slight play-

Anti-roll bar linkage has excessive play in a ball joint n/s/f link (2.4.G.2)

Brake pipe excessively corroded brake pipe to n/s/r flexi corroded (3.6.B.2c)

Brake pipe excessively corroded brake pipe to o/s/r flexi corroded (3.6.B.2c)

Exhaust system not adequately supported front exhaust mounting missing (7.1.1)

Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc o/s/f inner cv boot split (2.5.C.1a)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Stop lamp not working (1.2.1b)

Suspension component mounting prescribed area is excessively corroded n/s complete inner sill holed and distorted (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded n/s outter sill holed complete,multiple places (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded n/s/f inner arch holed (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded o/s inner sill holed multiple places (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded o/s middle outter sill holed (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded o/s/f inner arch holed (2.4.A.3)

drivers seat torn-child seat fitted to rear unable to check seatbelt

inner and outter sills corroded-o/s/f chasis leg/jacking point corroded

n/s/f chasis leg/jacking point corroded-x2 rear shocker casings corroded and damaged

o/s/f brake pipe corroded-front brakes juddering-front pads worn low

rear bumper damaged-heat shield insecure-exhaust and mountings corroded

x2 front tyres on limit and edges bald-x2 rear shockers damp and weak

x2 rear wheel arches corroded/covered by substance unable to check properly

x2 rear wheel bearings slight play-all outter arches corroded

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Upper Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Lower Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside and offside front inner CV boots missing

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside and offside front inner CV boots missing

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside inner CV boot missing

Offside inner CV boot missing

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside inner CV boot missing

Offside inner CV boot missing

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Windscreen wiper blade deteriorated (8.2.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake cable has restricted free movement (3.5.1k)

Offside Front Windscreen wiper blade deteriorated (8.2.2)

Offside Rear Brake cable has restricted free movement (3.5.1k)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

rear brakes release unevenly (3.7.B.4)