2005 Jaguar X-type

Engine MIL inoperative or indicates a malfunction eml on (8.2.2.2 (g))

Nearside Rear Hydraulic brake calliper leaking caliper leaking (1.1.16 (b) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outter sill needs welding (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill needs welding (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outter sill needs welding (5.3.6 (a) (i))

Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users failed emissions (8.2.2.2 (c)) DANGEROUS

Front Brake disc in such a condition that it is seriously weakened discs (1.1.14 (a) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm tyre 225/45/17 (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm tyre very close (5.2.3 (e)) DANGEROUS

headlight beam image only just met the standards

rear discs lipped

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Outer Suspension component attachment bracket/mounting corroded and seriously weakened sill (5.3.3 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Rear Brake pipe leaking on a hydraulic braking system front to rear (1.1.11 (b) (ii)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Brake lining(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake lining(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Brake lining(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Power steering pipe(s) or hose(s) leaking pipe to power steering rack leaking (2.3.3b)

Nearside Front Brake lining(s) wearing thin (3.5.1g)

Nearside Front Brake lining(s) wearing thin (3.5.1g)

Nearside Rear Brake lining(s) wearing thin (3.5.1g)

Offside Front Brake lining(s) wearing thin (3.5.1g)

Offside Rear Brake lining(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Nearside Front Brake lining(s) wearing thin (3.5.1g)

Nearside Rear Brake lining(s) wearing thin (3.5.1g)

Offside Front Brake lining(s) wearing thin (3.5.1g)

Offside Rear Brake lining(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Tyre worn close to the legal limit (4.1.E.1)